Tyre Puncture
Removing Wheels
u
Installation
1. Attach the side collars.
2.
Position the wheel between the fork legs
and insert the front axle shaft from the
right side, through the right fork leg and
wheel hub.
NOTICE
When installing a wheel or caliper into original position,
carefully fit the brake disc between the pads to avoid
scratching them.
Front axle nut
90
3. Install and tighten the front axle nut.
Torque: 54 N·m (5.5 kgf·m, 40 lbf·ft)
4. After installing the wheel, apply the brake
lever several times, then check if the wheel
rotates freely. Recheck the wheel if the
brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.