Table of Contents
Advertisement
Heating Specifications
Fuel Burn Rate* (lowest setting)
Burn Time (lowest setting)
Hopper Capacity
Flue Size
* Pellet size may effect the actual rate of fuel feed and burn times. Fuel feed rates may vary by as much as 20%.
Use PFI listed fuel for best results.
Dimensions
Height
Width
Depth
Weight
Electrical Specifications
Electrical Rating
Watts (operational)
Watts (igniter running)
FUEL CONSIDERATIONS
Your pellet stove is designed to burn premium hardwood pellets that comply with the Pellet Fuel Institute (PFI)
(minimum of 40 lbs density per cubic ft, 1/4" to 5/16" diameter, length no greater than 1.5", not less than 8,200
BTU/lb, moisture under 8% by weight, ash under 1% by weight, and salt under 300 parts per million). Pellets that
are soft, contain excessive amounts of loose sawdust, have been, or are wet, will result in reduced performance.
Store your pellets in a dry place. DO NOT store the fuel within the installation clearances of the unit or within the
space required for refuelling and ash removal. Doing so could result in a house fire.
Do not over fire or use volatile fuels or combustibles, doing so may cause a personal and property damage
hazards.
SAFETY AND EPA COMPLIANCE
Your pellet stove has been approved for installation in the USA and Canada. It may also be installed in a
manufactured or mobile home. Your stove conforms to ASTM E1509-12 (2017), and Certified to ULC S627-00, and
(UM) 84-HUD.
WARNING: It is against federal regulations to operate this wood heater in a manner inconsistent with the
Note: Register your product on line at www.usstove.com. Save your receipt with your records for any claims.
Specifications
1.4lbs per hr
32 hrs
46lbs
3" or 4" (77mm to 102mm)
37.16" (944mm)
20.81" (529mm)
22.25" (566mm)
162lbs
120 Volts AC, 60 HZ, 3 Amps
125W
310W
operating instructions in the owner's manual.
-3-
Advertisement
Table of Contents
