Before First Use; Settings - AEG LFM8C9612S User Manual

Table of Contents

Advertisement

10. BEFORE FIRST USE

During installation or before
first use you may observe
some water in the appliance.
This is a residual water left
in the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.

11. SETTINGS

11.1 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option,
touch the Taches/Prélavage and the
Rinçage Plus buttons simultaneously
until the indicator
off on the display.
You can activate this option:
• After you touch the Départ/Pause
button: all the buttons and the
programme dial are deactivated
(except Marche/Arrêt button ).
• Before you touch the Départ/Pause
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
11.2 Acoustic signals
This appliance is provided with different
acoustic signals, that operate when:
• You activate the appliance (special
short tune).
• You deactivate the appliance (special
short tune).
• You touch the buttons (click sound).
• You make a wrong selection (3 short
sounds).
• The programme is completed
(sequence of sounds for about 2
minutes).
comes on/goes
3. Pour 2 litres of water into the
detergent compartment marked by
.
This action activates the drain system.
4. Pour a small quantity of detergent
into the compartment marked by
5. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
To deactivate/activate the acoustic
signals when the programme is
completed, touch the Rinçage Plus and
the Départ Différé buttons
simultaneously for about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
11.3 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a
programme where it is selectable.
• To activate/deactivate this option
touch the Rinçage Plus button and the
Options button simultaneously the
relevant indicator comes on/goes
off.
This option adds two rinses and the
display shows
11.4 Douceur Plus
Set the Douceur Plus option to optimise
the fabric softener distribution and
improve the fabric softness.
It is suggested when you use the fabric
softener.
ENGLISH
23
.
.

Advertisement

Table of Contents
loading

Table of Contents