Water tank for Auto Ice Maker (applicable models only)
To fill the water tank (applicable models only)
A
CAUTION
• Make sure the water tank fits into the shelf. Otherwise, the water tank may not operate
properly.
• Fill the tank only with potable water such as mineral or purified water. Do not use other
liquid.
• Use caution when moving a filled tank. Physical injury may occur if the tank is dropped.
• Do not try to disassemble the internal pump yourself. If the internal pump is damaged
or disconnected from the water tank, the Auto Ice Maker does not operate.
NOTE
If you are not using the Auto Ice Maker, you can remove the water tank for more storage
space.
Untitled-22 39
For first-time use, clean the inner side of
the water tank and dry well.
1. Hold both handgrips on the front of the
tank, and slide out as shown.
2. Open the front lid (A) of the cover or the
entire cover (B) and fill the tank with a
water.
CAUTION
Do not exceed the max line. Water
overflows.
B
3. Reinsert the water tank and fit into the
dispenser mechanism. Make sure the
front side (with the front lid) of the tank
faces to the front.
English
39
2021-08-05
5:26:27