Samsung RT44A Series User Manual page 29

STEP 2 Flooring
STEP 3 Adjust the levelling legs
CAUTION
• In all cases including door reversal, to prevent the refrigerator from tipping, make sure
the leveling leg on the door is on the floor and fully supporting the weight of the door.
• When installed, the refrigerator must be leveled on a flat, solid floor. Not leveling the
refrigerator can cause damage to the refrigerator or physical injury.
• Leveling must be performed with the refrigerator empty. Make sure no food items are
inside the refrigerator.
• For safety reasons, adjust the front a little higher than the rear. Level the refrigerator
using the special screws (levelers) on the front legs. Use a flat-head screwdriver to turn
the levelers.
Untitled-22 29
• The surface to install the refrigerator
must support a fully loaded refrigerator,
or approximately 90 kg.
• To protect the floor, put a large piece
of cardboard on each leg of the
refrigerator.
• Once the refrigerator is in its final
position, do not move it unless
necessary to protect the floor. If you
have to, use a thick paper or cloth such
as old carpets along the movement path.
To level the refrigerator, use a flat-
head screwdriver to turn the leveling
leg clockwise or counterclockwise. Turn
the leveling leg clockwise to raise, and
counterclockwise to lower the height.
English 29
2021-08-05 5:26:25