LG -P768 Service Manual page 23

LG-P768 Product SPEC
Rx Min input Sensitivity
Rx Max input Sensitivity
Rx Adjacent Channel
Rejection
11) GPS receiver specification
11) GPS receiver specification
Item
Receive Frequency
Minimum Sensitivity
12) Current consumption
12) Current consumption
WCDMA
Only
GSM
Only (Paging=5 period)
** Test condition for Standby current consumption should be as below.
: Measurement time 1hr, with Agilent & CMT JIG
LGE Internal Use Only
-82dBm@6.5Mbps, -79dBm@13Mbps, -77dBm@19.5Mbps
-74dBm@26Mbps, -70dBm@39Mbps, -66dBm@52Mbps
≥ -20dBm @ PER ≤ 10%(2400 ~ 2483.5 MHz)
≥ -30dBm @ PER ≤ 10%(5150 ~ 5825 MHz)
ACR ≥ 16dB@6.5Mbps, ACR ≥ 13dB@13Mbps,
ACR ≥ 11dB@19.5Mbps, ACR ≥ 8dB@26Mbps,
ACR ≥ 4dB@39Mbps, ACR ≥ 0dB@52Mbps
ACR ≥ -1dB@58.5Mbps, ACR ≥ -2dB@65Mbps
※ACR shall be measured by setting the desired signal's
strength 3 dB above the rate-dependent
Sensitivity specified in min input sensitivity
1 satellite ≥-142dBm, 7 satellites ≥ -147dBm at coarse time
Stand by
Bluetooth Off Bluetooth Connected
4.5 mA under
(DRX=1.28)
4.5 mA under
(Paging=5 period)
PER ≤ 10%
-65dBm@58.5Mbps, -64dBm@65Mbps
PER ≤ 10%,
Specification
1574.42 MHz ~ 1576.42 MHz
aiding
6 mA under 270 mA under
(DRX=1.28)
6 mA under 340 mA under
- 23 - Copyright © 2012 LG Electronics. Inc. All right reserved.
2. PERFORMANCE
Voice Call VT
NA
(Tx=12dBm)
(Tx=Max)
Only for training and service purposes