4.2. Link Aggregation Configuration
4.2.1. About Link Aggregation
Link aggregation is a function that can increase the bandwidth between
Switching Hubs by dividing multiple switch ports into groups and
connecting the grouped ports to each other.
When using both link aggregation and access control functions, assign a
practical physical port number to a port list of access control, not a logical
port created in link aggregation. For details, refer to 4.4.
The maximum number of ports and groups is as follows.
Product name
Switch-M24eGi
Switch-M16eGi
Note: Depending on number of ports in a group or the traffic condition,
traffic may not be assigned uniformly to all the ports.
Note: If you shutdown one of the ports where the Link Aggregation is
configured, this action shutdowns all the ports of the same group
member of the Link Aggregation.
Max. number of
ports/group
8
200
Max. number of
groups
8