Table of Contents
Advertisement
General information
Real time clock
Analyses the real time clock
System monitoring
Thermal control and fan diagnostics
Processor
Processor diagnostic: this operates with a number of different mathematical functions
Memory
Memory/second level cache test:
Level 1 is configured to run a maximum of 5 min in butterfly test mode.
Level 2 is configured to run on 100% of the memory with the butterfly test and the random
sequence test.
Level 3 is configured to run on 100% of the memory with the alternate block test, line
bounce test, random block test, random address test, butterfly test, and random sequence
test.
Graphics
Checks the video memory chips with several patterns.
Hard disk
Read-only test for IDE and SCSI hard disk drives.
Level 1 is configured to run for a maximum of 2 min of reading.
Level 2 makes a 20-minute read test and then starts the smart self test.
Level 3 is configured to run on 100% of the hard disks. It starts the smart, short, and
extended tests.
Optical drives
CD/DVD test, using MSCDEX (IDE and SCSI).
Mouse
Diagnostic for PS2/USB mouse via reset/enable/disable/interface-test.
Serial and parallel port
Serial/parallel port register diagnostics
Firewire IEEE 1394
Tests communication with all firewire devices attached.
Keyboard
Diagnostic for PS2/USB keyboard via reset/enable/disable/interface-test.
Siemens
Medical Solutions
TD00-400.840.10.03.02
02.08
Page 9 of 32
CS SD SP/CO
9
R630/R640; M440/M450
Advertisement
Table of Contents
