Run Diagnosis Level 2 - Siemens R630 Troubleshooting Manual

24

Run diagnosis level 2

By choosing the diagnosis in "Level2", the computer will be tested within approx. 30 min-
utes.
Fig. 6:
"Level 2" scans more deeply than "Level1" but is more time consuming.
DIFS then shows the result of the diagnosis with ECS-Code, the location of the error, and
additional details of the failure.
If a defect could not be found in "Level2", you can also select a single test in the Diagno-
sis/Configure dialog
to run repeatedly.
R630/R640; M440/M450
SC4 - Test and level selection for a user-configured diagnosis
(Fig. 6 / p.
TD00-400.840.10.03.02
02.08
Troubleshooting with DIFS16P
24). This test takes a minimum of one hour and can be set
Page 24 of 32
CS SD SP/CO
5.2
Siemens
Medical Solutions