Load Setup Defaults - Gigabyte GA - 686KX User Manual

GA-686KX
COM4/2E8 Enable onboard Serial port A and address is 2E8.
Disabled Disable onboard Serial port A.
·
Onboard Serial Port 2
The default value is Auto.
Auto BIOS will automatically setup the port B address.
COM1/3F8 Enable onboard Serial port B and address is 3F8.
COM2/2F8 Enable onboard Serial port B and address is 2F8.
COM3/3E8 Enable onboard Serial port B and address is 3E8.
COM4/2E8 Enable onboard Serial port B and address is 2E8.
Disabled Disable onboard Serial port B.
·
Onboard Parallel port
The default value is 378/IRQ7.
378 Enable onboard LPT port and address is 378/IRQ7.
278 Enable onboard LPT port and address is 278/IRQ5.
Disabled Disable onboard LPT port.
3BC Enable onboard LPT port and address is 3BC/IRQ7.
·
Onboard Parallel Mode
The default value is SPP.
SPP Using Parallel port as Normal Printer Port.
EPP Using Parallel port as Enhanced Parallel Port.
ECP Using Parallel port as Extended Capabilities Port.
ECP+EPP Using Parallel port as ECP & EPP mode.
·
USB Controller
The default value is Disabled.
Enabled Enable the USB function.
Disabled Disable the USB function.

4.11. LOAD SETUP DEFAULTS

4-20