PAINTED PARTS AND SILKSCREEN PRINTED SURFACES
Clean using an appropriate product. Always dry thoroughly.
IMPORTANT:
these parts must be cleaned very carefully to avoid scratching and abrasion.
You are advised to use a soft cloth and neutral soap.
CAUTION: Do not use abrasive substances or non-neutral detergents
as these will irreparably damage the surface.
GAS TAPS
• In the event of operating faults in the gas taps, call the Service Department.
BURNERS
•
These parts can be removed and cleaned with appropriate products.
•
After cleaning, the burners and their flame spreaders must be well dried and correctly replaced.
•
It's very important to do so can check that the burner flame spreader and the burner have been
correctly positioned. Failure to do so can cause serious problems.
•
Check that the electrode/s next to each burner is/are always clean to ensure trouble-free sparking.
Both the probe and ignition plug must be very carefully cleaned.
Note: To avoid damage to the pulse ignition do not use it when the
burners are not in place.
11