Greasing - Kubota ZD1211 Operator's Manual

58 MAINTENANCE
(1) Drain plug (A) Oil level is acceptable within this range.
(2) Check plug (B) Oil level
(3) Oil inlet plug
(4) Gear case
(5) Check plug port
A RCK60R Similar
BGreasing
To avoid serious injury or death:
A Be sure to stop the engine and remove the key
before greasing.
Grease the following locations.
A Put grease into front wheel until grease overflows from
both ends of the front wheel.
(1) King pin (LH, RH)
(2) Center pin
(1) Tilt lever
(3) Front wheel (LH, RH)