Greasing; Every 25 Hours; Safety Devices; Checking Safety Devices - Kubota GR2000 Operator's Manual

44 PERIODIC SERVICE
.Greasing
A
CAUTION
To avoid personal injury:
• Be sure to stop the engine and remove the key
before greasing.
Grease the following locations.
1 BDAHADAP083B
(1) Spindle shaft
(2) Belt tension pulley
(3) Belt tension pivot
1 BDABARAP01 OF
(1) Mower universal joint (Apply grease on the spline shaft.)
EVERY 25 HOURS
.Safety Devices
[GR2000]
The Safety Devices in your machine are designed to
protect you while operating. Please check these Safety
Devices periodically - daily is best - to test function of the
Safety Devices before operation.
A
CAUTION
To avoid personal injury:
• Do not allow anyone near the machine while
testing .
• If the machine does not pass one of the
following tests, do not operate the machine.
See your local KUBOTA Dealer.
IMPORTANT:
• Check the following tests before operating the
machine .
• Checking Safety Devices
[GR2000]
1. Check the following tests before operating the mower.
Sit on the operator's seat for all tests.
2. If the machine does not pass one of the following tests,
do not operate the machine.
Contact your KUBOTA Dealer.
• Safety Start Control 1
1. Depress the brake pedal fully.
2. Engage the PTO lever.
3. Turn the key switch to the "START" position.
4. The engine should not crank.
• Safety Start Control 2
1. Disengage the PTO lever.
2. Release the brake pedal.
3. Turn the key to the "START" position.
4. The engine should not crank.
• Seat Safety Control 1
1. Run the engine at half throttle.
2. Engage the PTO lever.
3. Stand up. (DO NOT GET OFF THE MACHINE.)
4. Engine should shut off.
• Seat Safety Control 2
1. Run the engine at half throttle.
2. Disengage the PTO lever.
3. Release the brake pedal.
4. Stand up. (DO NOT GET OFF THE MACHINE.)
5. Engine should shut off.
• KUBOTA Reverse Awareness system
(KRA system) 1
1. Start and run the engine at half throttle.