Table of Contents
Advertisement
4.1.4
Intel
To enter the Intel
1.
Enter the BIOS Setup during POST.
2.
Go to the Advanced menu > PCH Storage Configuration, then press <Enter>.
Set the SATA Controller Mode Selection item to [Intel RST Premium With Intel
3.
Optane System Acceleration (RAID)].
4.
Go to the Boot menu > CSM (Compatibility Support Module) > Launch CSM, then
set the item to [Enabled].
5.
Save your changes, exit the BIOS Setup, then reboot your system.
6.
During POST, press <Ctrl> + <I> to display the utility main menu.
RAID Volumes:
None defined.
Physical Devices:
Port
0
1
2
3
The navigation keys at the bottom of the screen allow you to move through the menus
and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and may not
exactly match the items on your screen.
The utility supports maximum four hard disk drives for RAID configuration.
4-6
Rapid Storage Technology Option ROM utility
®
Rapid Storage Technology Option ROM utility:
®
Device Model
Serial #
ST3160812AS
9LS0HJA4
ST3160812AS
9LS0F4HL
ST3160812AS
3LS0JYL8
ST3160812AS
9LS0BJ5H
Size
Type/Status(Vol ID)
149.0GB
Non-RAID Disk
149.0GB
Non-RAID Disk
149.0GB
Non-RAID Disk
149.0GB
Non-RAID Disk
Chapter 4: RAID Support
Hide quick links:
Advertisement
Table of Contents
