Troubleshooting - Mattel HYPER SCAN Instructions Manual

SCAN BATTLE RESCAN
Trouble Shooting
Problem:
There is not picture on your TV Screen.
Solution(s):
• Make sure the HyperScan ™ Console, TV and
VCR/DVD Player (if used) are plugged into
power outlets.
• Make sure that the DC Jack on the AC Adapter is
firmly plugged into the DC Input Connector on the
back of the console.
• Make sure the power switches on the
HyperScan Console, TV, and VCR/DVD Player
™
(if used) are on.
• Check the connections between the console and
the TV or VCR/DVD Player (if used) and review
the appropriate Setting Up Your System section
in this booklet to be sure the system is set up
correctly.
• Make sure all cable connectors are securely
plugged into the appropriate sockets.
• Make sure that the INPUT settings are correct
for your particular setup. (Review Setting Up Your
System, point 3)
• If you are using an RF Switch connection, make
sure that the Channel Switch and TV are set to the
same channel (3 or 4)
• Check to be sure that the Game Disc is placed
correctly into the console.
• Make sure that the Game Disc is clean and in
good condition. If dirty, wipe with a soft cloth
from the center to the outside.
SCAN BATTLE RESCAN
Problem:
There is no sound or sound quality if poor.
Solution(s):
• Check if the TV volume is turned off or muted.
• Check the audio connections between the
HyperScan ™ console and the TV or VCR/DVD
Player (if used) and review pages 5 and 6 to be
sure the system is set up correctly.
• Make sure the AV cable is plugged into the
"Input" connectors on the TV or VCR/DVD Player
(if used) and not the "Output" connectors.
• If you have a mono TV or VCR/DVD Player (if
used) and left one of the audio cables uncon
nected you may not get all game sounds. Use
a "Y" adapter to get both left and right sound
channels.
• If your TV or VCR/DVD Player (if used) has both
mono and stereo options, make sure it is set to
match your setup.
• Make sure that the input settings are correct for
your particular setup. (Review page 5 point 3 on
input select information)