Eizo FlexScan L353T-C User Manual page 16

English
2.
Plug the power cord into the power connector on the rear of the
monitor. Then, plug the other end of the cord into a power outlet.
WARNING
Use the enclosed power cord and connect to the standard
power outlet of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may cause in fire or electric shock.
The equipment must be connected to a grounded main
outlet.
Not doing so may cause in fire or electric shock.
3.
Turn on the monitor's main power and then switch on the PC's
power.
The monitor's power indicator will light up (blue).
If an image does not appear, refer to the "6. TROUBLESHOOTING" (p.30) for
advice.
Turn on the monitor's main power and then switch on the PC's power.
4.
Install the touch panel driver TouchWare (for Windows 2000/XP) or
MT 7 (for Windows Vista) depending on your OS.
NOTE
• Regarding installing touch panel drivers and cautions, please refer to the
Installation Guides in the CD-ROM.
5.
Connect the upstream port of the monitor to the downstream port of
the USB compliant by using the USB cable.
After connecting the USB cable, the USB function can be set up automatically.
14
2. CABLE CONNECTION