Honda CRF250RX Owner's Manual page 55

20210720082638_32K958110_eng_BOOK Page 55 Tuesday, July 20 2021 08:28:26 JST
Removing & Installing Body Components
# Installation
Assemble the battery and battery rubber.
1.
Make sure the + and - marks on the
u
bottom of the battery rubber align
with the positive + and negative - of
the battery terminals.
Install the battery assembly.
2.
Install and tighten the battery terminal
3.
bolts. Always connect the positive +
terminal first. Make sure that bolts and
nuts are tight.
Tighten the positive + terminal bolt and
4.
negative - terminal bolt to the specified
torque:
Torque: 2.0 N·m (0.2 kgf·m, 1.5 lbf·ft)
Install the battery band.
5.
50
Battery
u
Install the battery lid and tighten the bolts
6.
to the specified torque:
Torque: 5.2 N·m (0.5 kgf·m, 3.8 lbf·ft)
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
P. 45
2
P. 54
2