Checking slope
If installation surface is tilted, the
•
washer will be shaken.
Horizontal setting
Lift up the front of the washer and
•
adjust level by turning the
adjustable legs clockwise or using
the adjusting plate.
Confirming level
• Place the washer to original position
and confirm the level.
Distance between drain hose and the wall
Distance between drain hose and the wall should
•
be more than 10 cm, and the distance between the
other part and the wall should be more than 2 cm.
More than 2cm
5
More than 10cm
More than 2cm