Connecting The Power Cord - AOpen 32HC5QR User Manual

CONNECTING THE POWER CORD

• Check first to make sure that the power cord you use is the correct type
required for your area.
• This monitor has a universal power supply that allows operation in
either 100/120V AC or 220/240 V AC voltage area. No user-adjustment
is required.
• Plug one end of the AC power cord to an AC inlet, and plug the other
end into an AC outlet.
• For unit using at 120 V AC:
Use a UL Listed Cord Set, Type SVT wire and plug rated 10 A/125 V.
• For unit using at 220/240 V AC (outside of U.S.):
Use a Cord Set consisting of H05VV-F cord and plug rated 10 A,
250 V. The cord set should have the appropriate safety approvals for
the country in which the equipment will be installed.
5