At+Qftpclose Logout From Ftp Server - Quectel WCDMA UG FTP Series At Command Manual

Parameter
<ftpstat> Integer type, indicates the current status of FTP services
0
1
2
3
4
<err> Integer type, indicates the operation error code. It is the type of error (Please refer to
the Chapter 4)

2.16. AT+QFTPCLOSE Logout from FTP Server

Logout from FTP server. If "OK" is returned, "+QFTPCLOSE: <err>,<protocol_error>" should be output in
<timeout> set by AT+QFTPCFG. Otherwise, you should deactivate and reactive the network.
AT+QFTPCLOSE Logout from FTP Server
Test Command
AT+QFTPCLOSE=?
Execute Command
AT+QFTPCLOSE
Parameter
<err>
<protocol_error>
WCDMA_UGxx_FTP_AT_Commands_Manual
or
+CME ERROR: <err>
Opening an FTP service
The FTP service is opened and idle
Transferring data with FTP server
Closing the FTP service
The FTP service is closed
Response
OK
Response
OK
+QFTPCLOSE: <err>,<protocol_error>
or
+CME ERROR: <err>
Integer type, indicates the operation error code. It is the type of error (Please refer
to the Chapter 4)
Integer type, for reference only, indicates the original error code from FTP server
which is defined in FTP protocol (Please refer to Chapter 5). If it is 0, it is
meaningless
UMTS/HSPA Module Series
WCDMA UGxx FTP AT Commands Manual
Confidential / Released 29 / 44