FLEXI
S501 20" Electric Folding Bicycle
Handlebar Assembly
Carefully place the bicycle assembly on a flat surface so that it rests on the front fork and rear wheel.
Place and slide the handlebar assembly centrally into position in the clamp, rotate the handlebar
assembly, as required, so it is aligned "square" to the front fork. That is, the handlebar will be at 90° to the
bicycle frame when the front wheel is straight.
Using an Allen key and torque wrench, tighten the screws to the torque.
Handlebar Installation Video Guide is available at
https://ct110.com.au/user-manual/S501-Handlebar.mp4
© 2020 TDRMOTO
7