Battery And Charging - TDR FLEXI S501 User Manual

FLEXI
S501 20" Electric Folding Bicycle
Safety
•
Riding can be a hazardous activity. Certain conditions may cause the equipment to fail without
fault of the manufacturer. The product can and is intended to move, and it is therefore possible to
lose control, fall-off and/or get into dangerous situations that no amount of care, instruction or
expertise can eliminate. If such things occur, you can be seriously injured or die, even when using
safety equipment and other precautions. RIDE AT YOUR OWN RISK AND USE COMMON-SENSE.
FAILURE TO USE COMMON- SENSE AND HEED ALL SAFETY WARNINGS AND
RECOMMENDATIONS INCREASES RISK OF INJURY. USE THE PRODUCT ONLY WITH
APPROPRIATE CAUTION AND SERIOUS ATTENTION TO SAFE OPERATION.
•
Before riding on the road, take time riding in an enclosed area to familiarise yourself with the
controls and behaviours of an electrically assisted bicycle. Try all settings so you are familiar with
the results.
•
Before every ride, check bicycle condition and ensure that no fasteners are loose, particularly
axles, pedals, seat and handlebars. Ensure that the tyres are inflated to within specification
(printed on the tyre sidewall), and that the brakes are operating correctly.
•
Maximum load capacity = 100kg.
•
Understand and obey any local laws or regulations which may affect locations where the product
may be used. Ride defensively.
•
Before each ride, check to ensure the frame latch, frame latch safety hook, handle post latch and
handle post safety hook are all properly secured. When secured, the frame and handle post will
be completely rigid.
•
This product is manufactured for performance and durability but is not impervious to damage.
Stunts or other aggressive riding can over-stress and damage the product, and the rider assumes
all risks associated with how the product is looked after.
•
Keep fingers and other body parts away from moving components.
•
Always wear suitable protective equipment, such as an approved safety helmet (with chin strap
securely buckled). A helmet may be legally required by local law or regulation in your area. Wear
suitable footwear for bicycle riding and clothing that helps make you visible to others.

Battery and Charging

•
Never modify the electrical system. Alterations could cause a fire resulting in serious injury and
could also damage the electrical system.
•
Charge with the supplied or recommended charger only. Use of the wrong charger could cause a
fire or explosion resulting in serious injury.
•
Ensure the voltage and frequency of the charger is compatible with mains electrical supply.
• Use the battery charger in dry locations only.
•
Regularly check the charger for damage to the electrical cord, plug, enclosure and other parts. If
any damage or malfunction occurs, do NOT use the charger until repaired or replaced.
•
Use caution when charging.
•
Do not operate the charger or charge batteries near flammable materials.
Do not clean or perform any maintenance on the product when it is being charged.
•
© 2020 TDRMOTO 2