Operation; Features; Insulation Resistance Test; About The Controls On The Air Conditioner - LG LW5012 Service Manual

Operation

Operation
Feature
• DESIGNED FOR COOLING ONLY
• POWERFUL AND INCREDIBLE COOLING
• TOP-DOWN CHASSIS FOR THE SIMPLE INSTALLATION AND SERVICE
• BUILT-IN ADJUSTABLE THERMOSTAT
• WASHABLE ONE-TOUCH FILTER
• COMPACT SIZE

Insulation Resistance Test

1. Unplug the power cord and connect a jumper between 2 pins (black and white).
2. The grounding conductor (green or green and yellow) is to be open.
3. Measure the resistance value with an ohm meter between the jumpered lead and each exposed metallic part
on the equipment at all positions [except Off] of the ROCKER SWITCH.
4. The value should be over 1 MΩ.
About the Controls or the Air Conditioner
Normal cooling
1. Turn the FAN speed mode switch to the "HI" or the "LOW" setting
2. Set the thermostat control to the desire temperature (the mid-point is a good
starting position).
If the room temperature is not satisfactory after a reasonable time, adjust the
control to a warmer setting, as appropriate.
Maximum cooling
1. Turn the FAN speed mode switch to the "HI" setting
2. Set the thermostat control to the cooler temperature mark.
Quieter operation
1. Turn the FAN speed mode switch to the "LOW" setting
2. Set the thermostat control as needed.
12 Room Air Conditioner
CAUTION:If you turn off the air conditioner or switch from cooling
to the fan,wait at least 3 minutes before setting to cooling again.
POWER
-Turns air conditioner off.
FAN SPEED "LOW "
Low speed fan operation with cooling or not.
FAN SPEED "HI" High speed fan operation with cooling or not.
This automatically controls the temperature of indoor air.Turn the
knob so that arrow points to the cooler marks for more moderate
cooling.
Normal Fan
1. Turn the FAN speed mode switch to the "HI" or the "LOW" setting
2. Set the thermostat control to the temperature mark "Fan Only"