Before Washing For The First Time - Asko DBI654IB Operating Instructions Manual

Before washing for the
first time
1. Checking water hardness
Contact the local water utility to check the water hardness in your area.
This is important with regard to how much detergent and rinse aid to
use.
4
2. Basic settings
Open the door and press the main power switch.
"Welcome to your new ASKO. This is a first time set up." is shown
on the display. It is important that you choose the right settings to en-
sure good dishwashing results.
Main power switch
Settings
1 Language
Select the language to be shown on the display.
2 Rinse aid 0/1/2/3/4/5
By using rinse aid you will improve your drying result. You will also
achieve a better dishwashing result with glassware and dishes.
Select rinse aid dosage. The rinse aid dispenser can be adjusted
between 0 (Off) and 5 (High dosage).
Pre-selected at factory: 5
To change the chosen setting, see the chapter Settings.
3. Top up with rinse aid
By using rinse aid you will improve your drying result. You will also
achieve a better dishwashing result with glassware and dishes.
Press to open
1 Open the rinse aid compartment lid.
2 Carefully top up with rinse aid. Only add rinse aid to the level marked
max.
3 Wipe up any splashes of rinse aid around the compartment.
4 Close the lid firmly.
Top up rinse aid
When the rinse aid needs topping up, the above symbol lights on the
display.
After topping up, it may take a while before the symbol goes out.
Select setting
Confirm setting