External Devices - Jensen VX7014 Operation Manual

VX7014

EXTERNAL DEVICES

Connecting External Devices
External devices, including a game console, video camera, etc. can be connected
to this unit using its front A/V In 3.5mm connector (AV In1), the rear RCA inputs
(AV In 2) or the front or rear USB ports.
NOTE:
The rear USB is for charging only (not playback).
You cannot directly control external devices connected to the A/V inputs using
the front panel controls or this unit's remote control.
AV In 1
AV In1 is used for playback of audio/video from an external device connected to
the unit through a 3.5mm connector. The unit can increase or decrease the
volume of the connected device. All other controls are done on the connected
device. Select AV In1 to playback audio/video from the front panel 3.5mm AV In.
AV In 2
AV In2 is used for playback of audio/video from an external device connected to
the RCA connectors located on the back of the unit (see the VX7014 Installation
Guide). The unit can increase or decrease the volume of the connected device. All
other controls are done on the connected device. Select AV In 2 to playback audio/
video from the rear RCA AV In
3.5mm A/V Cable (not included)
Right Audio
1
Left Audio
2
Ground
3
V ideo
4
USB Cable (not included)
microSD card slot
Connecting External Devices
13
OPEN