REGISTER YOUR PRODUCT ONLINE Register Your NewAir Product Online Today! Take advantage of all the benefits product registration has to offer: Service and Support Diagnose troubleshooting and service issues faster and more accurately Recall Notifications Stay up to date for safety, system updates and recall notifications...
• Do not place the fan near an open flame or cooking/heating appliances. • If the fan will not be in use, empty the tank of any remaining water. • If the fan’s plug or power cord is damaged, do not attempt to repair the components yourself. newair.com...
Adjustable misting flow with a fully insulated seal around the water pump • Oscillating fan head covers a wider area • Adds moisture to dry environments and eliminates airborne dust particles • Covers up to 800 square feet and features a 4-hour maximum run time with each full tank newair.com...
2. Place the stand pole on the fan base, align the screw holes and secure the pole in place using the screws, washers and nuts. Make sure the hole located near the bottom of the stand pole is facing the square shaped pump slot. newair.com...
Page 7
4. Take the small water hose from hole B and locate the connector that is attached to the back panel. Connect the small water hose to the lower valve opening on the connector. newair.com...
Page 8
3. Take the large water hose with 2 smaller water hoses within it and thread the entire piece through hole C. You should now have the water hoses and electric wire coming out the end of the metal pipe. newair.com...
Page 9
Make sure none of the hoses or wires are bent. 7. Reattach the screws onto the back panel. 8. Tighten the bolts located on the sleeve by the back panel to secure the stand pole and fan head/pipe together. newair.com...
Page 10
2. Locate the water tank and place it on the fan base, making sure to line up the pump opening with the pump slot so that they fit together. Place any protruding hoses or wires into the tank. 3. Put the tank cover over the tank. newair.com...
Keep in mind that the effectiveness of this misting fan improves as the temperature rises, but in areas with high humidity levels, you may want to use the fan with the misting function turned off for the best results. newair.com...
Always remember to remove the pump before cleaning the water tank. • If the misting fan will not be in use for an extended period of time, empty the water tank, cover the unit and keep it stored in a clean, dry place. newair.com...
The fan produces There is a leak in the Turn off the misting function uneven mist. water hose. and see if there are any air leaks in the hose. If the problem persists, contact customer service. newair.com...
When making a warranty claim, please have the original bill of purchase with purchase date available. Once confirmed that your appliance is eligible for warranty service, all repairs will be performed by a NewAir™ authorized repair facility. The purchaser will be responsible for any removal or transportation costs.