NewAir WindPro18F Owner's Manual

Floor fan 18” plated

Advertisement

Quick Links

WindPro18F
NewAir Floor Fan
18" Plated
OWNERS MANUAL
Read and save these instructions.
.

Advertisement

Table of Contents
loading

Summary of Contents for NewAir WindPro18F

  • Page 1 WindPro18F NewAir Floor Fan 18” Plated OWNERS MANUAL Read and save these instructions.
  • Page 2: Introduction

    Count on NewAir. As a proud NewAir owner, welcome to our family. There are no robots here, real people shipped your product and real people are here to help you.
  • Page 3: Table Of Contents

    Operating the Fan ..................7 Fan Craddle Assembly .................. 8 Cleaning & Maintenance ..................8 Taking Care of Your Product ................ 8 Fuse Replacement ..................9 Troubleshooting ....................10 Limited Manufacturer’s Warranty ..............11 PRODUCT SPECIFICATIONS WindPro18F ODEL 120V/60Hz VOLTAGE 0.831A AMPS 80W/90W/100W WATTS HIGH 21.18”...
  • Page 4: Safety Information

    • Do not use outdoors. • Do not use the fan near the window. Rain may cause electrical hazard (applicable for non‑window models). • Do not operate the fan with blade guards or any safety device removed. http://www.NewAir.com...
  • Page 5: Warnings

    • Avoid the use of extension cords due to risk of fire. If an extension cord must be used, the cord must be minimum 14 AWG and rated not less than 1875 watts. • Do not run power cord under carpeting. Do not cover cord with throw rugs, runners or the like.
  • Page 6 14 AWG and rated not less than 1875 watts. Do not use an extension cord unless the plug can be completely inserted into its receptacle. Unplug the fan when not in use. Do not operate fan with its ventilation obstructed. http://www.NewAir.com...
  • Page 7: Assembly Instructions

    ASSEMBLY INSTRUCTIONS ASSEMBLY OF THE METAL BASE Before installation, ensure the fan is unplugged from the power supply and turned off before commencing assembly. 1. Unscrew the screws from the Metal Tube. 2. Insert the Metal tubes into the Metal Base, re-insert and tighten the screws.
  • Page 8: Fan Craddle Assembly

    Periodic grille cleaning with a vacuum will prevent dust build up. The motor is sealed and does not require any interior maintenance, cleaning or lubrication. The internal motor bearings are permanently lubricated at the factory and do not require any additional lubrication. http://www.NewAir.com...
  • Page 9: Fuse Replacement

    DO NOT OPERATE THE FAN WITHOUT THE GRILLE IN PLACE. DO NOT USE THE FAN IF IT HAS MALFUNCTIONED OR BECOME DAMAGED IN ANY WAY. Keep original carton for storage of the fan. Coil and tie the power cord to avoid damage during storage.
  • Page 10: Troubleshooting

    Check for obstructions. If keeping the fan from you find an obstruction, working. turn the fan off. Unplug the fan and carefully remove the obstruction. Plug the fan in and turn it on again by referring to the operating instructions. http://www.NewAir.com...
  • Page 11: Limited Manufacturer's Warranty

    LIMITED MANUFACTURER’S WARRANTY This appliance is covered by a limited manufacturer’s warranty. For one year from the original date of purchase, the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship, provided the appliance has been used under normal operating conditions as intended by the manufacturer.

Table of Contents