Mercedes-Benz CL Operator's Manual page 116

Instruments
Operation
and controls
Malfunction and warning messages
CHIP-CARD (KEYLESS-GO)
Line 1
CHIP-CARD
CHIP-CARD
CHIP-CARD
CHIP-CARD
CHIP-CARD
* C = Category, see page 297.
Instrument
Driving
cluster display
Line 2 C*
1
CHECK BATTERY! 2
2
NOT RECOGNIZED! 1
3
NOT RECOGNIZED! 2
4
STILL IN VEHICLE! 1
5
DO NOT FORGET! 1
Practical hints Car care
318
1 Check battery of KEYLESS-GO-card, see page 366.
2 The KEYLESS-GO-card cannot be recognized by the running
engine (e.g. strong radio-frequency interference) or the card is not
in the vehicle.
Stop immediately and search for the KEYLESS-GO-card or continue
to operate the vehicle with the electronic key, otherwise the vehicle
cannot be centrally locked or the engine started again after the
engine stops automatically. See page 38.
3 The KEYLESS-GO-card was momentarily not recognized. If
message repeats, place card in a different position or continue to
operate the vehicle with the electronic key, see page 38.
4 A KEYLESS-GO-card left inside the vehicle has been recognized
while locking the vehicle from the outside, see page 38.
5 The message appears for a maximum 60 seconds each time the
driver's door is opened, as long as no electronic key is in the
starter switch. The message appears regardless of the past
operation method (electronic key or KEYLESS-GO-card), see
page 38.
Technical
Index
data