Table of Contents
Advertisement
III-3-1-2.
WAN Settings- Static IP
Click "Network", Select "WAN", Select Connection Type "Static IP". Then enter
IP, Subnet Mask, Gateway, MTU and DNS. Finally, click "Save" to confirm.
Connection Type
IP Address
Subnet Mask
Gateway
Primary DNS Server
Secondary DNS
Server
MTU
Specify a connection type:
Static IP mode, Dynamic IP (DHCP), PPPOE
Input the IP address assigned by your ISP here.
Input the subnet mask assigned by your ISP here.
Input the default gateway assigned by your ISP
here. Some ISPs may call this "Default Route".
Obtained from ISP.
Obtained from ISP.
Enter the maximum transmission unit (MTU) value
of your network connection. The default value is
1400.
32
Advertisement
Table of Contents
