Vehicle Battery Saver - Whistler PRO3700 Manual

Vehicle Battery Saver Mode
Vehicle Battery Saver Mode automatically shuts off the
detector if the unit has constant power.
The timer is reset:
1. Each time the detector is turned off.
2. The power cord is disconnected or power is removed to the
unit.
3. Any button is pressed before the timer has expired. The
detector will alert you with an audible and visual warning
before it shuts off. This auto off function can be programmed
for the following: Off, 1, 3, or 6 hours. During this warning
you can reset the timer by pressing any button. If the unit has
automatically turned itself off, press the Power button to turn
the unit back on.
Field Disturbance Sensor Rejection (FDSR)
Traffic Flow Sensor Rejection (TFSR)
Recently many new products that operate on police radar
frequencies have been causing nuisance alerts to radar detectors.
These radar based sensors are installed alongside the Highway
and more recently on vehicles used as lane change assist / blind
spot detectors / collision avoidance systems. TFSR when turned
ON is designed to eliminate alerts from specific Traffic Flow
sensors. FDSR when turned ON is designed to identify all radar
based collision avoidance systems that operate within the same
band as police radar and provide a brief less intrusive alert
to keep you informed and aware. A signal strength indicator
will help determine your proximity to the source without the
continued annoyance of audio.
We suggest you turn FDSR ON if you are experiencing
excessive random false alerts when behind select vehicles.
OPERATION
15