Mercedes-Benz GLE Manual page 28

26 26 MBUX multimedia system
Editing tr Editing track acks and r s and recor ecordings dings
Select õ Tracks.
#
Select the desired track.
#
Select options u for the desired track.
#
Select Rename or Delete.
#
or
Select a track.
#
Highlight the desired recording.
#
Select Z options.
#
Select Export to... or Delete.
#
Se Setting Dr tting Drag R ag Race ace
Multimedia system:
TRACK PACE Drag Race
4 5
Measur Measuring acceler ing acceleration ation
Select Z Drag Options.
#
Select Acceleration.
#
Set a starting speed or select Automatic.
#
Measurement begins as soon as the speci ed
starting speed has been reached.
Set a target speed.
#
Measurement stops as soon as the speci ed
target speed has been reached.
Pull away and start the measurement.
#
Measurement begins when the vehicle accel-
erates.
Measurement can be stopped early by stopping
the vehicle.
Quart Quarter er-mile r -mile race ace
Select Z Drag Options.
#
Select Quarter Mile.
#
Set a target distance.
#
Measurement stops as soon as the speci ed
target distance has been reached.
Pull away and start the measurement.
#
Measurement begins when the vehicle accel-
erates. Timing runs until the target distance or
a maximum of one mile has been traveled.
Measurement can be stopped early by stopping
the vehicle.
Measur Measuring br ing braking aking
Z Drag Options
#
Select Braking.
#
Set a starting speed or select Automatic.
#
Pull away and start the measurement.
#
Brake to a standstill.
#
Measurement is incremental, in steps of
5 mph (10 km/h) to a standstill. If the braking
procedure is started e.g. at a speed of 58 mph
(157 km/h), measurement starts as soon as
55 mph (150 km/h) has been reached.
S S t t or oring and calling up measur ing and calling up measurement v ement values
If measurement is completed or canceled, a
prompt appears asking whether the measurement
should be saved.
Con rm the prompt with ÷ to save.
#
Calling up saved measur Calling up sav ed measurements ements
Select ± History.
#
Select Acceleration, Quarter Mile
#
Select a measurement.
#
The desired measurement is displayed in
detail.
alues
or Braking.