Advertisement
DESCRIPTION
A ON/STAND-BY button
B +/- Adjustment buttons
C Oscillation button
D ECONOMY mode button
E Timer button
F MODE button
(for selecting the operating mode)
G Receiver for remote control
H Power indicator light
I Back cover
J Filter
ELECTRICAL CONNECTION
-
Before connecting the plug to the power outlet, make
sure that the voltage of your electrical system corre-
sponds to the voltage shown on the appliance rating
label and the outlet you are going to use is in good
condition.
-
THIS APPLIANCE COMPLIES WITH DIRECTIVE
2004/108/EEC ON RADIO INTERFERENCE SUPPRESSION.
INSTALLATION
The appliance may be used on any rigid horizontal surface.
Do not use the same socket for more than one appliance.
OPERATION AND USE
1. Connect the appliance to the power outlet.
2. The appliance emits a beep and the power indicator
light (H) also comes on and remains lit while power to
the appliance is on. The appliance goes into STAND-BY.
3. Press the ON/STAND-BY button (A) to turn on the
appliance. It will begin to heat with the predefined
settings.
4. Press the MODE button (F) to select one of the fol-
lowing functions available:
Ventilation (
)
Anti-freeze (
ting at minimum power (1)
power (2)
5.1 Ventilation (
In this operating mode only the fan operates, so
the appliance does not heat the room.
5.2 Anti-freeze (
In this operating mode the appliance keeps the
room at a temperature of 7°C (45°F) to prevent
freezing temperatures.
5.3 Heating 1 and Heating 2
In this operating mode you can set the desired
temperature by pressing the + and - adjustment
buttons (B).
Heating 1 (minimum power level):
The appliance operates at the minimum power,
)
H e a -
Heating at maximum
)
)
reducing noise and energy consumption to the
minimum.
Heating 2 (maximum power level):
The appliance operates at the maximum power
for rapid heating of the room.
6. ECONOMY MODE
In this operating mode the appliance will automatical-
ly set the power level to guarantee the best comfort
reducing the energy consumption. In this operating
mode the unit may switch the heating power level
from maximum to minimum and viceversa, several
time in an hour. The maximum temperature setting is
26 °C (79 °F). To activate this function, press the ECO
button (D). The unit, will always start at the maximum
power.
7. If you want the appliance to distribute the airflow over
a larger area, press the oscillation button (C) (
The appliance will then oscillate right and left. To stop
the oscillation in the desired position, just press oscilla-
tion button (C) again.
8. To turn off the appliance press button ON/STAND-BY
(A). The display could show the count down for about
6 seconds. To completely turn off the appliance, remo-
ve the plug from the socket.
NOTE: The display can show the temperature in both °C and
°F. To change the temperature scale, press and hold the +
key for few seconds, then release.
24-HOUR DIGITAL TIMER
This function can be activated from any operating mode.
Delayed switch-on: with the appliance in the STAND-BY
position, press the timer button (E) (
The display shows the symbol
ning before switch-on. To set the timer, use the + and -
adjustment buttons (B), then wait a few seconds for the
programming to be set.
The display shows the symbol
set the timer. When the programmed time has been rea-
ched, the appliance turns on with the same settings it
had during the previous operation.
Delayed shut-off: With the appliance on, press the timer
button (E) (
). The display shows the symbol
the time remaining before shut-off.
To set the timer, use the + and - adjustment buttons (B),
then wait a few seconds for the programming to be set.
The display returns to show the current settings and the
symbol
to indicate you have set the timer. When the
programmed time as been reached the appliance shuts
off automatically.
If you want to go back to operation without the timer, press
the timer button (F) twice. The timer symbol
from the display.
).
).
and the time remai-
to indicate you have
and
disappears
3
Advertisement
