Configure To Support Iptv Service - TP-Link Archer AX6000 User Manual

Chapter 14
4. Select the Static LAG
aggregation mode for both ends of the link.
5. Click SAVE. The LAN2 and LAN3 ports will be used for Link Aggregation.
14 3

Configure to Support IPTV Service

I want to:
Configure IPTV setup to enable Internet/IPTV/Phone service provided by my internet
service provider (ISP).
How can I do that?
1 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2 Go to Advanced
3 If your ISP provides the networking service based on IGMP technology, e.g., British
Telecom(BT) and Talk Talk in UK:
1 ) Tick the IGMP Proxy
either V2 or V3, as required by your ISP.
2 ) Click SAVE.
3 ) After configuring IGMP proxy, IPTV can work behind your router now. You can
connect your set-top box to any of the router's Ethernet port.
or LACP mode. It's recommended that you select the same link
> Network > IPTV/VLAN.
and IGMP Snooping
Customize Your Network Settings
checkbox, then select the IGMP Version,
81