Advertisement
It's very important to set wireless security settings properly! If you don't, hackers and
malicious users can reach your network and valuable data without your consent and this will
cause serious security problem.
To set wireless security settings, Please click 'Wireless' menu on the left of web management
interface, then click 'Security Settings', then follow the following instructions to set wireless
security settings:
Please select an encryption method from 'Encryption' dropdown menu, there are four options.
And we will inform you about WPA function.
When you select this mode, the wireless router will use WPA encryption, and the following setup
menu will be shown on your web browser:
Here are descriptions of every setup items：
WPA Unicast
Cipher Suite :
Pre-shared
Key Format :
Pre-shared
Key :
After you finish WPA Pre-shared key setting, please click 'Apply' button and the following
message will be displayed on your web browser:
Please select a type of WPA cipher suite.
Available options are: WPA (TKIP), WPA2 (AES), and WPA2
Mixed. You can select one of them, but you have to make sure
your wireless client support the cipher you selected.
Select the type of pre-shared key, you
can select Passphrase (8 or more alphanumerical characters,
up to 63), or Hex (64 characters of 0-9, and a-f).
Please input the WPA passphrase here.
It's not recommended to use a word that can be found in a
dictionary due to security reason.
16
1
Advertisement
