Haier HFF750CGBJ User Manual page 18

Use
Select the working mode
You may need to select one of the following two ways to set the appliance:
1) Auto Set mode
Under Auto Set mode, the appliance can automatically adjust the temperature setting ac-
cording to the ambient temperature and temperature change in the appliance. If you do
not have any special requirements, we recommend that you use Auto Set mode (refer to
Auto Set mode later on).
2) Manual adjusting mode:
If you want to manually adjust the temperature of the appliance in order to store a par-
ticular food, you can set the temperature via a temperature adjusting button (refer to
ADJUST THE TEMPERATURE).
Door opening alarm
When the refrigerator door is opened for more than 1 minute, the door opening alarm
will sound. The alarm can be silenced by either closing the door or touching the control
panel. If the door is left open for more than 5 minutes, the light inside the compartment
and control panel illumination will automatically switch off .
Adjust the temperature
The indoor temperatures are infl uenced by the following factor:
Ambient temperature
Frequency of door opening
Amount of stored foods
Installation of the appliance
1.
16
Adjust the temperature for fridge
2.
1. Unlock the panel by pressing button "G" if it is
2. Press button " A" (Fridge) for select the fridge com-
r
3. Press button "A" to set the fridge tempera-
If no key is operated in 5 sec., the setting confi rms au-
tomatically.
locked.
partment. An alarm sounds. The setting tempera-
ture in the refrigerator compartment is displayed.
ture. A signal will sound at each key press.
The temperature increases in sequences of 1°C
from a minimum of 1°C to a maximum of 9°C,
switching to 1°C again when pressing further. The
optimum temperature in the refrigerator is 5 °C.
Colder temperatures mean unnecessary energy
consumption.
EN