EchoStar DSB-808 2Ci Viaccess User Manual page 18

Familiarization
Section 4
1.2. THE RECEIVER REAR PANEL
The rear panel gives you various connections to connect the audio and video equipment as
well as a terrestrial and dish antennas. Depending on the installation setup, you may not use
all connectors, but they are provided for any desired setup in future.
The available connectors on the rear panel are:
The mains conenctor, for the conenction
to the mains power socket.
The SERIAL PORT connector (sub-D),
for the connection to the serial
communication port of a PC;
The VIDEO connector (RCA),
for the connection to the composite
video input of the TV (monitor);
The S/PDIF connector (RCA),
for the connection of Dolby Digital (AC-3)
compatible audio equipment;
The AUDIO L connector (RCA),
for the connection of the left audio input
channel of a stereo set;
The AUDIO R connector (RCA),
for the connection of the right audio input
channel of a stereo set;
Page 4 - 2
The LNB IN connector (F-type),
for the connection of a dish to the
receiver, to receive the digital
broadcasts;
The IF OUT connector (F-type), for a
loop through connection;
The ANT IN connector (IEC),
for the connection of an terrestrial TV
antenna;
The TV OUT connector (IEC),
for the connection to the antenna
connector of a TV or a VCR;
The VCR connector (SCART), for the
connection of a VCR with the use of a
fully-featured SCART-cable;
The TV connector (SCART),
for the connection of a TV with the use of
a fully-featured SCART-cable;
EchoStar DSB-808 2Ci Viaccess