EchoStar DSB-800 2Ci User Manual page 11

DiSEqC 1.2 Mount
In case you are using a DiSEqC positioner, you should set the
most eastern satellite and the most western satellite you want on
the "Position" bar.
- Most Eastern satellite : change the satellite name to what you
want for the most eastern satellite on the "Satellite" bar and
move to "Position" bar and press the Volume down key(?)
until the Signal Level is at the medium level or higher.
And press the OK key to store this satellite as the most eastern
satellite.
- Most Western satellite : change the satellite name to what you
want for the most western satellite on the "Satellite" bar
and move to "Position" bar and press the Volume up key(?)
until the Signal Level is at the medium level or higher.
And press the OK key to store this satellite as the most western
satellite.
Then, start the "Auto Search" to search and store the TV channels and Radio channels of the satellite automatically.
User's Setting
User's Settings are only accessible via the Installation screen.
Language Setting
User's Setting
1 Language Setting
2 Local Time Setting
3 A/V Output Setting
4 About EchoStar
i
You can select a different language for the OSG (On-Screen Graphics) display using the
the "Menu Language" option is selected. Similarly you can selected a different audio channel when the
"Audio Language" option is selected. This option allows you to select a different language to listen to if
supported.
Subtitle
Select the "Subtitle Language" in the "Language Setting" menu. While viewing
a channel, the subtitling option is available only when the selected subtitling
language is provided by the broadcaster.
To check if the subtitling language is available, press "
control unit, to show a list of all available subtitling languages.
Exit
" key on the remote
10
FIXED DISH
DiSEqC 1.2
Mount
LNB IN
Language Setting
1 Menu Language
2 Main Audio Language
3 2nd Audio Language
4 Subtitle Language
i
Subtitle
LNB
? ?
English
English
English
English
Exit
keys when
None
Eng
Ita