EchoStar DSB-1100 User Manual page 8

Receiver to TV with Audio and Video RCAs
1. Connect the Off-air TV antenna or cable if available to the ANT IN socket of the EchoStar DSB-1100 Viaccess.
2. Connect the TV OUT socket of the EchoStar DSB-1100 Viaccess with the RF IN of the TV set.
3. Connect the Video and Audio RCAs of the EchoStar DSB-1100 Viaccess to the Video and Audio RCAs of the TV set.
TV
TV ANTENNA
RF IN
VIDEO AUDIO
IN IN
VIDEO
(400mA Max.)
ANT IN
AUDIO
TV OUT
Receiver to TV and VCR with SCART Cables
1. Connect the Off-air TV antenna or cable if available to the ANT IN socket of the EchoStar DSB-1100 Viaccess.
2. Connect the TV OUT socket of the EchoStar DSB-1100 Viaccess with the RF IN of the VCR.
3. Connect the RF OUT of the VCR to the RF IN of the TV set.
4. Search on the VCR for UHF channel # 38. This is the default channel where the EchoStar DSB-1100 Viaccess is programmed to.
5. Connect the SCART cable from the TV SCART of the EchoStar DSB-1100 Viaccess to the SCART of the TV set.
6. Connect the SCART cable from the VCR SCART of the EchoStar DSB-1100 Viaccess to the SCART of the VCR.
7. When the EchoStar DSB-1100 Viaccess is switched on the TV set, it will automatically switch to the SCART input of the TV.
Note : Use different UHF channels for VCR and EchoStar DSB-1100 Viaccess.
TV
TV ANTENNA
VCR
RF OUT RF IN VCR SCART
TV SCART RF IN
VIDEO
(400mA Max.)
ANT IN
AUDIO
TV OUT
7