Crispers And Pans - GE GTE18M Owner's Manual & Installation Instructions

Crispers and Pans

Not all features are on all models.
Fruit and Vegetable Crispers
Excess water that may accumulate in the bottom of the
drawers or under the drawers should be wiped dry.
Crisper Removal
storage drawers.
To remove:
Lift the drawers up slightly while pulling them past the
stop location.
If the door prevents you from taking out the drawers, first
try to remove the door bins. If this does not offer enough
clearance, the refrigerator will need to be rolled forward
until the door opens enough to slide the drawers out. In
some cases, when you roll the refrigerator out, you will
need to move the refrigerator to the left or right as you
roll it out.
8
Humidity Control
HIGH LOW
Adjustable Humidity Crisper
Slide the control all the way to the High setting to provide
high humidity recommended for most vegetables.
Slide the control all the way to the Low setting to provide
lower humidity levels recommended for most fruits.
To remove the glass cover:
Remove the glass, then the frame. When replacing the
glass, push the front edge firmly into the frame.
1. Push up the glass cover at
the rear.
2. Slide the glass cover
backwards until the front
edge comes out of the
frame.
3. Rotate the side of the glass
cover up.
4. Remove the glass cover.
To remove the frame:
1. Lift up the front of the
frame using both hands.
2. Slide the frame forward.
3. Rotate the side of the
frame up.
4. Remove the frame.
Humidity Control
HIGH LOW
Removing the glass cover
Removing the frame
49-1000592 Rev. 2