Controls - GE GTE18M Owner's Manual & Installation Instructions

Controls

Control Settings
Refrigerator Control
When first powered all lights are illuminated for 3
seconds.
The factory setting 3 is displayed after 3 seconds.
Change setting by pressing SET key, each time you
press it will advance by 1. Press until the desired setting
is achieved. Adjust controls one increment at a time
to determine your preferred setting. Allow 12 hours
after each adjustment for the refrigerator reach the
temperature you have set. Setting 1 is the warmest 5 is
the coldest.
Standby Mode
When the refrigerator is in ON, Press SET for 3 seconds
the refrigerator will go into standby mode, the standby
indicator light will be on.
Standby setting will stop cooling in both the refrigerator
power to the refrigerator.
6
1 is cold
5 is coldest
Revert to normal operation by pressing the SET button,
the standby light will go off, it will go back to the last
setting.
the fresh food compartments. Changing the fresh
affect the temperature of the fresh food compartment.
Control settings will vary based on personal preferences,
usage and operating conditions and may require more
include the amount of food in the fresh food and
temperature of food when placed in either compartment.
49-1000592 Rev. 2