Installing The Wall-Hanging Bracket - Panasonic Viera TH-65FX700A Operating Instructions Manual

Table of Contents

Advertisement

Preventing the TV from falling over
It is recommended to secure the pedestal to a furniture
as shown to prevent the TV from falling over.
This information is designed to reduce the risk of
injuries caused by the TV falling over. However, no
measure can guarantee protection in all cases.
8
English
Installing the wall-
hanging bracket
Choosing to wall mount the TV shall be done at the
owner's risk. Always use a qualified installer to perform
a TV wall bracket installation. Incorrect fitting may cause
equipment to fall, resulting in injury and product damage.
Any such damage will void your warranty.
Screw
Band
Wood
screw
When using the wall-hanging bracket
Holes for wall-hanging bracket installation
Rear of the TV
a
b
(View from the side)
Depth of screw
minimum: 9 mm
maximum: 22 mm
Type of screw: M6
Screw for fixing the TV onto the
wall-hanging bracket (not supplied with
the TV)
Warning
When optional accessories such as wall brackets, etc.
are used, always read and follow the manufactures
installation and usage instructions.
Do not mount the unit directly below ceiling lights
(such as spotlights or halogen lights) which typically
give off high heat. Doing so may warp or damage
plastic cabinet parts.
When installing wall brackets you must ensure the
wall bracket is not electrically grounded to metal wall
studs. Always ensure that there are no electrical
cables, pipes, etc. in the wall before you begin the
wall bracket installation.
To prevent fall and injury, remove the TV from its fixed
wall position when it is no longer in use.
a: 400 mm
b: 300 mm

Advertisement

Table of Contents
loading

This manual is also suitable for:

Viera th-65fx700zViera th-65fx740z

Table of Contents