Assembly; Unpacking; Install Accessory Kits - DeWalt DXGNR4000 Instruction Manual

Assembly

Unpacking

• Remove all packaging material.
• Remove separate accessory kit box.
• Remove generator from carton.
Accessories
Check contents against the list in Contents. If any parts
are missing or damaged, or if any problems occur during
assembly, call the Generator Helpline at 1-888-431-6871.
Contents
Item
Generator
Owner's Manual
Product Registration Card
(English, Spanish, and French)
Service and Emissions Warranty
SAE 30 Oil
Oil Funnel
Wheel (A)
Frame Foot (B)
Handle Assembly (C)
Hardware Bag
Cotter Pin (D)
1/2" Flat Washer (E)
M8 Carriage Bolt (F)
M8 Bolt (long) (G)
M8 Hex Flange Nut (H)
1/2" Axle Pin (J)
M8 Acorn Nut (K)
Spark Plug Wrench

Install Accessory Kits

The generator requires some minor assembly before
use.
Tools Required
Obtain the following tools:
• Two 12mm and one 13mm box wrenches
Owner's Manual for Portable Generator
Install Wheel Kit
The wheels are specially designed to enhance portability.
NOTICE:
Slide axle pin (J) through wheel, 1/2" flat washer (E), and
1.
wheel bracket on frame.
Insert cotter pin (D) and bend tabs to lock in place.
2.
G
Qty.
1
H
1
3
1
1
1
2
2
1
Install Frame Foot and Rubber Bumpers
Slide M8 bolt (G) through holes in frame rail. Slide frame
1.
foot (B) onto M8 bolts. Install locking flange nuts (H).
2
Install Handle
2
Slide M8 carriage bolt (F) through handle bracket and han-
1.
2
dle assembly (C) by first inserting the bolt through the
square hole in the handle assembly (C).
4
Install M8 acorn nut (K).
2.
4
2
2
1
The wheels are not intended for over-
the-road use.
B
E
D
F
C
J
A
003604
7