Table of Contents
Advertisement
COMFORT
Intelligent Access
*
You can unlock and lock the vehicle without taking the key out of
your pocket or purse when your intelligent access key is within 3 feet
(1 meter) of your vehicle. To unlock, touch the unlock sensor on the
back of the door handle for a brief period and then pull on the door
handle, being careful to not touch the lock sensor at the same time
or pull the door handle too quickly. To lock, touch the door handle
lock sensor on the door for approximately one second, being careful
to not touch the unlock sensor on the back of the door handle at the
same time.
Memory Function
*
The memory function allows a one-touch recall of personalized
memory features including the driver seat, power mirrors and power
steering column. Use the memory controls on the driver door to
program and then recall memory positions. Move the seats and
steering column to the desired positions. Press and hold the SET
button until you hear a single tone. Then press the desired preset
button until you hear a single tone. Repeat this process to set
subsequent memory positions. You can now use these controls to
recall the set positions
You can also program your memory seat to your transmitter. That
way, when you unlock your door with the transmitter, your memory
features automatically move into your saved positions. See the
Seats chapter in your Owner's Manual for more details.
Remote Start
*
Remote start allows you to start the engine from outside your
vehicle using your key.
To start, press
and then press
Before driving your vehicle, you must press the push button ignition
switch on the instrument panel while applying the brake pedal. You
can also turn your vehicle off from outside after a remote start by
pressing
once. If your vehicle is equipped with remote feedback,
an LED on the key provides status feedback of remote start or stop
commands. A solid green light means the remote start or extension
was successful while a blinking red light means the remote start or
stop has failed. A solid red light means that the remote stop was
successful and the engine is off. When the system is waiting for a
status update from the vehicle you will see a blinking green light.
twice within three seconds.
Advertisement
Table of Contents
