Audio/Video - Sony VAIO VGN-BZ560 Series User Manual

Audio/Video

What should I do if I cannot use my DV camcorder?
❑ If it is prompted that the i.LINK device seems to be disconnected or turned off, the i.LINK cable may not be securely
plugged into the port on your computer or camcorder. Unplug the cable, and plug it in once again. See Connecting an
i.LINK Device (page 98)
❑ If you have disabled the i.LINK port in the BIOS setup screen, you cannot use the device connected to the i.LINK port. To
enable the port, follow the steps and the tip in Disabling Built-in Devices
✍
i.LINK is a trademark of Sony Corporation used only to designate that a product contains an IEEE 1394 connection. The procedure to establish an i.LINK
connection may vary, depending on a software application, an operating system, and a compatible i.LINK device. Not all products with an i.LINK
connection can communicate with each other. See the manual that came with your compatible i.LINK device for more information on operating
conditions and proper connection. Before connecting compatible i.LINK PC peripherals to your system, such as a CD-RW or hard disk drive, confirm
their operating system compatibility and required operating conditions.
How do I turn off the Windows startup sound?
To turn off the Windows startup sound, follow these steps:
1 Click Start and Control Panel.
2 Click Hardware and Sound.
3 Click Manage audio devices under Sound.
4 On the Sounds tab, click to cancel the Play Windows Startup sound check box.
5 Click OK.
for more information.
(page 137).
n 205 N
Troubleshooting