Connecting To A Network (Lan) - Sony VAIO VGN-BZ560 Series User Manual

Connecting to a Network (LAN)

You can connect your computer to 1000BASE-T/100BASE-TX/10BASE-T-type networks with an Ethernet network cable.
Connect one end of a network cable (not supplied) to the network (Ethernet) port on the computer or the optional docking
station and the other end to your network. For detailed settings and devices needed to connect to the network, ask your
network administrator.
!
You cannot access Ethernet networks if you disable the network (Ethernet) port in the BIOS setup screen. To enable the port, follow the steps and the
tip in Disabling Built-in Devices
✍
Your computer can be connected to the network with the default settings.
When your computer is attached to the optional docking station, you need to select which network (Ethernet) port to use. Follow the on-screen
instructions.
(page 137).
n 100 N
Using Peripheral Devices