Advertisement
T IME A LAR M
Set Alarm Time:
1. Hold the ALARM button to enter Alarm Settings Menu. The
Seconds will be replaced by the letters "AL".
2. The Alarm Hour will flash. Use the ARROW buttons to adjust
values. Press the ALARM button to confirm and move to the
minutes.
3. The Alarm Minutes will flash. Use the ARROW buttons to
adjust values. Press the ALARM button to confirm and exit.
Activate/Deactivate Alarm:
Setting the alarm time and activating the alarm are separate steps.
1. Press the ALARM button to view alarm time.
2. Press and release the UP ARROW to activate or deactivate the
Time Alarm.
3. The Alarm Icon (bell) will appear when active.
4. The Alarm Icon (bell) will disappear when inactive.
Snooze:
• When the alarm sounds, press the SNOOZE button to silence
the alarm for 5 minutes.
• Press any button (except SNOOZE) to silence the alarm for 24
hours.
Page 4
RE SE T B U T TON
• If the Digital Clock display appears distorted or is not responding
to buttons, use a pen or paper clip to press RESET one time.
• This will reset the atomic clock to default settings.
S PE C I F I CAT I ON S
Indoor Temperature Range: 32°F to 122°F (0°C to 50°C)
Power Requirements: 2 AA batteries (not included)
Battery Life: 24 months
Dimensions: 8.9" L x 1.2" W x 7.2" H (22.60 L x 3.04W x 18.2 H cm)
W E 'R E H E RE TO HE L P !
If you require additional support, call or customer support team based out
of La Crosse, Wisconsin.
Phone: 1.608-782-1610
Or fill out our online support request form here:
Our knowledgeable support team is available: Monday-Friday, 8am-6pm
CST
J O I N T HE C ON V E R SAT I ON
Ask questions, watch detailed setup videos, and provide feedback on our
social media outlets!
Page 5
WA RRA N TY I N FO
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on
this product relating to manufacturing defects in materials & workmanship.
For Full Warranty Details, Visit:
CAR E + MAINTENANCE
•
Do not mix old and new batteries.
•
Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
•
Always purchase the correct size and grade of battery most suitable for intended use.
•
Clean the battery contacts and also those of the device prior to battery installation.
•
Ensure the batteries have with correct polarity (+ / -).
•
Remove batteries from equipment that will not to be used for an extended period.
•
Promptly remove expired batteries.
CANADA STATEM ENT
This device complies with CNR Industry Canada license -exempt devices. Operation is subject to the following
two conditions:
(1 ) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the
device.
F CC STATEM ENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
bit.ly/contact_techsupport
•
Reorient or relocate the receiving antenna.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Increase separation between equipment & receiver.
•
Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
(1 ) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
CAUTION!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or
modifications to this equipment. Such changes or modifications could void the user authority to operate the
equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed
using electronic, mechanical or chemical process without the written permission
of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and corrections
are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or
their consequences. All trademarks and patents are recognized.
WARNING: This product can expose you to chemicals including styrene, which is known to the State of
California to cause cancer. For more information go to:
www.lacrossetechnology.com/support
www.P65Warnings.ca.gov
Page 6
Advertisement
