Battery Replacement And Charging - Hiboy S2R User Manual

screws.

4. Battery Replacement And Charging

1
1. Insert the key into the keyhole
3
3. The handle jumps up automatically as soon as
the battery is unlocked
screws.
9
9
2. Turn the key to unlock the battery
4
4. Carefully pull the battery out of the step surface
of the e-scooter by the handle
6
9
(Fig.1)
2
(Fig.3)
(Fig.5)
1. Open the protective cap of the charging socket on the battery
(Fig. 1 and Fig. 2). Make sure the charging port and charger are dry.
Move the folded scooter by holding the front tube tightly with one hand or
2. Connect the charging cable to the charging socket (Fig. 3
and Fig. 4). The charging light on the charger will light red when
(Fig.2)
charging. The battery is charged once the charging light changes from
red to green. You should stop charging at this point.
3. Disconnect the charger from the mains and from the battery.
Connect the charging socket on the battery.
4. Check the battery container and battery are dry before you insert
(Fig.4)
the battery back into the e-scooter. Insert the battery into the e-scooter
and press the handle down (Fig. 5 and Fig. 6) until the lock audibly
clicks into place.
5
(Fig.6)
7
EN-12