Canon PS-7000 Service Manual page 36

4.3.1. Check Point
The configuration is printed in this area. An "x" indicates any appropriate number.
ROM Version
RAM Amount
HD1 Amount
HD1 Free
HD2 Amount
HD2 Free
Output Device Name
<Network Board>
IP Address
Node Address
ROM Version
Firmware Option
*1: Memory amount
*2: Additional HDD capacity
Available capacity of the additional HDD
*3: 8 digits of Mac address unique to the machine (same as on the label pasted on the Rear Panel)
: 913289396
: *1
: 2067MB
: XXXXMB
: *2
: *2
: BJ-W7000
: XXX.XXX.XXX.XXX
: *3
: 04.28
: 00002812
Standard: 64MB
With Upgrade Kit: 128MB
Without Upgrade Kit: 0MB
With Upgrade Kit: 2067MB
Without Upgrade Kit: 0MB
With Upgrade Kit: xxxMB
3-13
Chapter 3 Troubleshooting
-
PS-7000 ROM version
-
Memory amount
-
Built-in HDD capacity
-
Available HDD space
-
Additional HDD capacity
-
Available capacity of the additional HDD
-
Connected printer
-
Network IP address
-
8 digits of Mac address unique to the
machine (same as on the label pasted on
the Rear Panel)
-
Version of ROM on the Network Board
-
Fixed