Table of Contents
Advertisement
4.) Press the OPEN/CLOSE
the CD door.
The display will show "TOC READ" as the
player reads the Table Of Contents on each
disc. As it reads each disc the display will
briefly show the total tracks and playing time
on each disc.
After reading the last disc the display will again
show the total tracks and playing time of
DISC 1.
Note: It may take 15 to 20 seconds for the player to read the TOC of all 2
discs. The reading time may be even longer if you are using CD-RW
(ReWritable) discs. This is normal and not an indication of any problem
with your unit.
5.) To play Disc 1, press the
To start playback with Disc 2 , press the CD 2
button.
The Play indicator
6.) When playback begins, adjust the VOLUME and EQ controls as desired.
7.) Playback will continue until all tracks on all discs have been played, then the
player stops.
To stop playback at any time, press the STOP
8.) If you are finished listening, press the OPEN/CLOSE
door, remove your discs from the player, re-close the door and press the
STANDBY
button to return the system to the Standby (Off) mode.
ES1065_021705.p65
button to close
button or press the CD 1 button.
appears in the display.
25
25
button.
button to open the CD
17/2/2005, 15:41
Advertisement
Table of Contents
