Pc With Wi-Fi Adapter - D-Link DIR-2150 Quick Installation Manual

DIR-2150

PC with Wi-Fi Adapter

1. To connect via USB modem:сonnect your USB modem to one of two
USB ports
In some cases you will need to reboot the router after connection of the
!
USB modem.
2. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
3. Turn on the router by pressing the POWER button on its back panel.
4. Make sure that the Wi-Fi adapter of your PC is on. As a rule, modern
notebooks with built-in wireless NICs are equipped with a button or
switch that turns on/off the wireless adapter (refer to your PC
documents). If your PC is equipped with a pluggable wireless NIC, install
the software provided with your Wi-Fi adapter.
Then make sure that your Wi-Fi adapter is configured to obtain an IP address
automatically (as DHCP client).
3 It is recommended to use a USB extension cable to connect a USB modem to the
router.
3
.
Quick Installation Guide
10